System Categories
-
Exterior And Interior Concrete And Masonry
-
Gypsum Board, Ficem Board And Other Cement Boards
-
Floor Coatings
-
Roofs
-
Waterproofing
-
Epoxy Tank Lining
-
Swimming Pool Paint
-
Quick Dry Enamel And Flat Wall Enamel
-
Polyurethane Clear Varnish
-
Steel Coatings
-
Stoneworks Clear Coating
-
Fire Retardant
-
Plaster Bonding
-
Sealing Of Leaks
-
Traffic Paints
-
Mildewcides
-
Notes
Exterior And Interior Concrete And Masonry
A. PRIMESEAL/DESTINY WATER-BASED SYSTEMS – For Interiors and Exteriors of Homes and Other Small to Medium-sized Buildings
-
Primer–Primeseal Water-based Alkali-resistant Clear Sealer (1 – 2 coats) – Clear
-
Putty–Masonry Wall Putty Water-based (Full or Spot Putty) – Off-White. (Sand.)
-
Topcoat–Destiny Flat, Semi-gloss or Gloss Latex (2 coats) – White, Tint with Accu-color, or
-
Destiny Elastomeric Waterproofing Paint (2 coats) – 70 colors
B. EPOPRIME/ DESTINY WATER-BASED SYSTEMS – For High-rise Buildings, Other Larger Buildings and Structures, and Buildings and Structures in Extreme Environments
-
Primer–Epoprime Water-based Epoxy Primer and Masonry Waterproofer (1 – 2 coats) – White
-
Putty–Masonry Wall Putty Water-based (Full or Spot Putty) – Off-white. (Sand.)
-
Topcoat–Destiny Flat, Semi-gloss or
-
Gloss Latex (2 coats) – White, Tint with Accu-color, or
-
Destiny Elastomeric Waterproofing Paint (2 coats) – 70 colors
C. SINTEX ACRYLIC SOLVENT-BASED TILE FINISH SYSTEM – For High-rise Buildings, Other Larger Buildings and Structures in Extreme Environments
-
Primer–Epoprime Water-based Epoxy Primer and Masonry Waterproofer (1 – 2 coats) White, Or
-
Sintex Tile Primer Acrylic Solvent-based (1 – 2 coats) – White
-
Putty–Sintex Putty Acrylic Solvent-based (Full Putty) – Off-white. (Sand.)
-
Topcoat–Sintex Tile Acrylic Solvent-based, Flat, Semi-gloss, Gloss
(2 coats) – White, factory-mix for color
D. DESTINY ELASTOMERIC TILE FINISH SYSTEM – For High-rise Buildings, Other Larger Buildings and Structures in Extreme Environments
-
Primer–Epoprime Water-based Epoxy Primer and Masonry Waterproofer (1 – 2 coats) White
-
Putty–Sintex Putty Acrylic Solvent-based (Full Putty) – Off-white. (Sand.)
-
Topcoat–Elastomeric Tile Acrylic Solvent, Flat, Semi-gloss, Gloss
(2 coats) – White, factory-mix for color
E. ECOFRESH LOW ODOR ANTI-BACTERIA FINISH – For interiors of Hotels, Hospitals, Schools, Offices, Other Institutional Buildings and Homes
-
Primer–Primeseal Water-based Alkali-resistant Clear Sealer (1 – 2 coats) – Clear
-
Putty–Masonry Wall Putty Water-based (Full or Spot Putty) – Off-white. (Sand.)
-
Topcoat–Ecofresh Low Odor Anti-bacterial Interior Latex, Matte,
Midsheen, Semi-gloss (2 coats) – White, tint with Accu-color
F. STUCOLIFE ALKALI-RESISTANT LATEX PRIMER AND TOPCOAT – For
Housing Projects and All Types of Buildings and Houses – Interiors and Exteriors
-
Primer–Stucolife Alkali-resistant Latex Primer and Topcoat (1 coat) – White
-
Putty–Masonry Wall Putty (Full or Spot Putty) – Off-white. (Sand.)
-
Topcoat–Stucolife Alkali-resistant Latex Primer/Topcoat (2 coats) – White, Tint with Accucolor
G. SKIMKOTE SMOOTH RENDERING PASTE – For Rough Interior Surfaces
-
Concrete Plaster Finishing–Skimkote Smooth Rendering Paste (Full coat) – Cement Gray. (Sand.)
-
Topcoat–Destiny Flat, Semi-gloss or Gloss Latex (2 coats) – White, Tint with Accu-color, or
-
Destiny Elastomeric Waterproofing Paint (2 coats) – 70 colors, or
-
Destiny Elastomeric Tile High gloss finish (2 coats) – White, Tint with Accu-color for pastel color; factory-mix for bright color
-
–Ecofresh Low Odor Anti-bacteria Interior Latex, Matte, Midsheen or
-
Semi-gloss (2 coats) – White, tint with Accu-color
-
–Stucolife Alkali-resistant Latex Primer/Topcoat (2 coats) – White, Tint with Accucolor
Notes:
(1) We made neutralizing obsolete. No need to neutralize provided the recommended Destiny primers are used. Neutralizing is not full-proof. Alkalinity can still act on the applied paint, immediately or in the long run. Our primers’ application labor cost is equal to the application of Neutralizer anyway. Better to apply a sure system.
(2) We made the 28 day waiting-for-concrete-to-dry obsolete. Above Destiny Paint primers may be applied on newly applied concrete plaster on the third day after the plastering provided the plaster surface is already dry. No need to wait 28 days. Makes painting faster.
(3) For textured finishes apply Sintex Cast by mortar gun after the sanded putty, then apply topcoats. Cast
may be small cast, medium cast or large cast.
(4) Elastomeric Paints are of eggshell sheen. This may be increased to Semi-gloss by the addition of one(1) liter Destiny Elastomeric Hi-gloss Clear and mixed thoroughly. Or it may be made Hi-gloss by painting-over the topcoat with Elastomeric Hi-gloss Clear.