DP-1003 Tile Red
Nine (9) colors plus Clear. Chlorinated rubber-based paints are durable water and acid resistant coatings. They find use as coatings for properly prepared and primed concrete and steel, interior and exterior. Their water resistance makes them ideal for swimming pool internal surfaces in lieu of tiles. They provide colorful effects as liners for swimming pool floors and sides, and surrounding concrete walls. Many attractive colors, and may be made non-skid for safe walking on swimming pool surroundings, commercial and pleasure boat decks, and industrial plant walkways. Very popular for basketball courts, badminton courts and other recreation and sports usages – shaded areas and liners. For industrial and marine uses, used for coating primed concrete walls, steel surfaces and concrete floors. Most effective when applied over Destiny Epoprime for concrete and Destiny Epoxy Red Oxide Primer for steel. For Architectural uses, ideal for roof decks, shower rooms, laundry rooms and basements.
Nine (9) colors plus Clear available. May be intermixed.
SURFACES TO BE PAINTED, SUBSTRATES
Concrete floors and walls, and properly primed steel. Especially formulated for industrial walls, floors and equipment and where resistance to chemicals and water are needed. May be used for submerged applications. For maximum performance it is recommended to be used in conjunction with Destiny Epoprime Water-based Epoxy Primer and Masonry Waterproofer as primer.
Destiny CRB Reducer.
Do not tint.
Brush, roller or spray. Do not re-brush or recoat partly dried areas.
COVERAGE/ SPREADING RATE
Fifteen (15) to twenty (20) square meter per 4 liter.
One (1) hour before recoating.
Stir well before using and stir well when blending colors.
1 liter and 4 liter can
1. Store in shaded ventilated area.
2. Keep out of reach of children.
3. Keep tightly closed when not in use.
4. Flammable. Keep away from fire, sparks and heat.
5. For swimming pools, fish ponds and other submerged applications:
a. The pool walls and floors must be properly prepared. Only poured concrete or concrete plaster is allowed. No laitance, pure cement used for smoothing, concrete curing compounds or concrete hardeners. Consult the manufacturers of distributors of concrete additives as to their compatibility with paints and coatings.
b. Use Destiny Sintex Putty as putty for smoothing out the surfaces.
c. Apply two (2) coats Destiny Epoprime Water-based Epoxy Primer and Masonry Waterproofer as primer. Make sure that the surfaces are thoroughly covered – no voids, pinholes or other bare areas.