SG-1003 Tile Red
A tough corrosion resistant coating for steel works and other metals. Primer and topcoat, no primer necessary. May be applied on properly prepared bare steel and other ferrous metals. Two component. Various colors available. Resistant to the UV rays of the sun. Tough and tenacious. Resistant to water, oil, chemicals and solvents. Recommended for all interior or exterior above grade steel structures, tanks, platforms, catwalks and pipe works, especially for marine and most corrosive environments. Also applicable for above-waterline ship decks, masts and upperstructure applications.
Ten (10) colors including black, white and clear.
SURFACES TO BE PAINTED, SUBSTRATES
Steel, black iron, wrought iron, cast iron and galvanized iron substrates Preferable to pretreat all ferrous metals with Zero Rust Converter. May also be applied over epoxy primed metal surfaces.
Steelguard Reducer only
Not applicable. Do not tint
Apply by brush, roller or spray
COVERAGE/ SPREADING RATE
25 square meters per four (4) liter set
One (1) hour
Stir the contents of the Part A Base. Then add all of the Part B Catalyst and stir very well. No Induction Period necessary. Reduce only with Steelguard Reducer. Mixture may be applied immediately after mixing. Be sure to apply the mixture within two (2) hours after mixing as it will start to harden in the can.