This is a tough solvent-based heavy-duty Putty for smoothing out plastered and properly primed masonry surfaces, or properly primed wood and metal. It is applied by putty knife to smooth out the masonry, wood or metal walls, prior to application of topcoats, or prior to application of Sintex Cast as textured paint. It is a much tougher putty than most masonry putties, excellent for exterior walls, particularly for high-rise buildings where it is desired to extend recoating cycles. It is the ideal putty for smoothing out concrete floors prior to application of either Epoxy Enamel or Triple X Chlorinated Rubber Floor Coating. It has excellent durability and flexibility, and chemical and water resistance. Epoprime Water-based Epoxy Primer is the recommended primer for concrete. Solvent-based Epoxy Primers, White, Gray or Red Oxide, are recommended for wood or metal. It is applicable for both interior and exterior, including submerged applications such as swimming pools and ponds. It may be topcoated with epoxy, chlorinated rubber-based and most solvent based paints, and with water-based paints.
Smooth and flat after fine sanding.
SURFACES TO BE PAINTED, SUBSTRATES
Concrete and other masonry, floors and walls, and properly primed wood or metal.
Destiny CRB Reducer.
Do not tint.
Use Putty knife. Then sand with fine sandpaper.
COVERAGE/ SPREADING RATE
Depends on thickness of application. Do not apply thicker than one-eighth of an inch at a time. For thicker cracks, crevices or unevenness, apply several layers one-eighth inch at a time.
Twenty (20) to thirty (30) minutes when topcoated with water-based topcoat.
Overnight when topcoated with epoxy, chlorinated rubber or other solvent-based paint.
Use as-is, or stir very well when reduced with Sintex Reducer.
4 liter and 16 liter can.
1. Store in shaded ventilated area.
2. Keep out of reach of children.
3. Keep tightly closed when not in use.
4. Flammable. Keep away from fire, sparks and heat.