Primeseal is a water-based clear primer and sealer for concrete and masonry surfaces, exterior and interior, such as building and home walls, posts and ceilings, It is made from a highly advanced penetrating polymer that seeps into the pores and hairline cracks of the concrete or masonry. This fills the voids in the concrete pores with solid masses. As a result the pores and hairline cracks are sealed with an elastomeric barrier that prevents exit of alkaline moisture and efflorescence. Its very low cost per square meter makes it the most ideal first coat for application on concrete and masonry surfaces. In addition, because there is no need to neutralize the concrete surface, further savings are enjoyed. The Prime Seal’s surface also strengthens the adhesion between topcoat and primer.
SURFACES TO BE PAINTED, SUBSTRATES
Concrete and other masonry
Use at package viscosity.
Apply by brush, roller or spray.
COVERAGE/ SPREADING RATE
Thirty (30) to forty square meters per four (4) liter, depending on the porosity of the surface.
One (1) to two (2) hours
Stir the container well before use.
1 liter, 4 liter and 16 liter plastic
1. Store in shaded ventilated area.
2. Keep out of reach of children.
3. Keep tightly closed when not in use.