Accu-color Water-based Tinting Color

CODE NUMBER

    201 Black
    210 Venetian Red
    217 Permanent Maroon
    202 Hansa Yellow
    211 Permanent Violet
    223 Raw Umber
    205 Raw Sienna
    212 Permanent Yellow
    224 Burnt Umber
    207 Cobalt blue
    213 Permanent Orange
    226 Burnt Sienna
    208 Thalo Blue
    215 Thalo Green
    209 Toluidine Red
    216 Permanent Red

 

DESCRIPTION

Sixteen (16) water-based tinting colors. For tinting Destiny Flat, Semi-gloss and Gloss Latex Paints, Stuc-o-life Alkali Resistant Latex Paint Flat, Elegancia Flat, Semi-gloss and Gloss Latex Paints, Epoprime, Ecofresh Low Odor No VOC Matte, Mid-sheen and Semi-gloss and Bingo Flat and Gloss Latex Paints to unlimited tints, tones and shades. May be used for tinting water-based paints of other brands, but need to test for compatibility. Mix into the base paint at a maximum of 5 % by volume. They may also be used as a paint, especially for colorful sign painting. May be used for interior or exterior except for three colors – 202 Hansa Yellow, 207 Cobalt Blue and 209 Toluidine Red.

 

COLOR

Available in complete range of primary colors. Refer to Destiny Accu-color Color Chart for available colors and tints.

 

FINISH/ SHEEN

When used as a Finish Coat – Flat.

When used as a tinting Color – Dominated by the sheen of the base paint.

 

SURFACES TO BE PAINTED, SUBSTRATES

When used as a Finish Coat – Properly prepared and primed wood, metal and concrete.

When used as a Tinting Color – Apply on substrates applicable by the base paint.

 

THINNER/ REDUCER

As a Finish Coat – Thin sparingly with water only.

As a Tinting Color – Use at package viscosity. Or dilute the color with a small portion of the base paint for use as intermediate.

 

TINTING COLOR

As a Finish Coat – May be shaded with other Accu-colors. Stir well.

As a Tinting Color – May be used in combination with other Destiny Accu-colors for tinting base paints. The total volume of tinting color must not exceed five (5) percent of the base paint. Otherwise the properties of the base paint may be altered. Stir well.

 

APPLICATION

When used as a Finish Coat – Follow procedures as for Latex Paints.

When used as a Tinting Color – Follow application procedures as for the base paint.

 

COVERAGE/ SPREADING RATE

As a Finish Coat – Use as-is. 50 to 60 Square Meters per 4 Liter.

As a Tinting Color – Follow the Coverage recommended for of the base paint.

 

DRYING TIME

As a Finish Coat – One hour. 1 to 2 hours before recoating.

As a Tinting Color – Follow drying time of the base paint.

 

MIXING INSTRUCTIONS

As a Finish Coat – Stir well before using.

As a Tinting Color – Stir well before tinting, and stir the tinted paint very well.

 

PACKAGING

60 ml., 250 ml., 1 liter and 4 liter cans.

 

CAUTIONS

1. Store in shaded ventilated area.

2. Keep out of reach of children.

3. Keep tightly closed when not in use.

4. For interior use.