Floor Coatings

A. TRIPLE X CHLORINATED RUBBER BASED FLOOR AND WALL COATING – PLAYING COURT FINISHES
– Basketball, Tennis and Badminton Courts

  • Primer
    Epoprime Water-based Epoxy Primer and Masonry Waterproofer (2 coats) – White
  • Crack Filler
    Epotuff Epoxy Putty (As needed) – Off-white. (Sand.)
  • Putty
    Sintex Putty Acrylic Solvent-based (Full or Spot Putty) – Off-white. (Sand.)
  • Topcoat
    Triple X Chlorinated Rubber Based Floor Coating (2coats) – 10 colors, or
  • Triple X Chlorinated Rubber Based Floor Coating Non-skid
    (2 coats) – 10 colors. Factory-mixed.

 
B. HARDFLOOR LIGHT DUTY EPOXY FLOOR COATINGS – For Parking Decks and Factory Floors

  • Primer
    Epoprime Water-based Epoxy Primer and Masonry Waterproofer (2 coats) – White
  • Crack Filler
    Epotuff Epoxy Putty (As needed) – Off-white. (Sand.)
  • Putty
    Sintex Putty Acrylic Solvent-based (Full or Spot Putty) – Off-white. (Sand.)
  • Topcoat
    Haard Floor Light Duty Epoxy Floor Coating (2 coats) – 10 colors, or
  • Haard Floor Light Duty Epoxy Floor Coating Non-skid (2 coats) – 9 colors Factory-mixed or plus Beads (separate package)

 
C. HARDFLOOR HEAVY DUTY EPOXY FLOOR COATING – For Extreme Parking Decks and Factory Floors

  • Primer
    Epoprime Water-based Epoxy Primer and Masonry Waterproofer (2 coats) – White
  • Crack Filler
    Epotuff Epoxy Putty (As needed) – White. (Sand.)
  • Epoxy Mortar
    For 1 mm. thickness – No epoxy mortar
  • For 2 – 4 mm. thickness – Epoxy Mortar with thickness as required – Clear, without Beads
  • Topcoat
    Haardfloor Heavy Duty 98 Percent Solids Self-leveling (Up to
    2 mm. thickness – 1 coat by trowel) – 11 colors
  • Topcoat for Non-skid
    Haard Floor Light Duty Epoxy Non-skid (2 coats) – 10 colors. Factory-mixed or plus Beads (separate package)

 
D. MAAGNUM FLOOR HIGH-BUILT SELF-LEVELING – For Airplane Hangars and Other Floor Coatings Requiring Resistance to Highly Corrosive Chemicals and Solvents

  • Primer
    Epoprime Water-based Epoxy Primer and Masonry Waterproofer (2 coats) – White, or
  • Epoxy Clear Sealer (2 coats) – Clear
  • Crack Filler
    Epotuff Epoxy Putty (As needed) – Off-white. (Sand.)
  • Epoxy Mortar
    For 1 mm. thickness – No epoxy mortar
  • For 2 – 4 mm. thickness – Epoxy Mortar with thickness as required – Clear (without Beads)
  • Topcoat
    Maagnum Floor High Built 100 Percent Solids Self-leveling (Up to 1 mm. thickness) – Color as required, Factory-mixed

 
E. FLOORGUARD INDOOR AND OUTDOOR PROTECTIVE FLOOR COATING – For Exterior Parking Decks, Driveways, Roof Deck Topcoats and Other Exterior Usages

  • Primer
    Epoprime Water-based Epoxy Primer and Masonry Waterproofer (2 coats) – White
  • Crack Filler and Putty
    Epotuff Epoxy Putty (Full or Spot Putty) – Off-White. (Sand.)
  • Topcoat
    Floor Guard Indoor and Outdoor Protective Floor Coating (2 coats) – 10 colors

 
F. EPOBOND CONCRETE EPOXY
 
F – 1 AS CONCRETE EPOXY BINDER – For Binding Old Concrete to Newly
Poured Concrete and Concrete Plaster

  • Existing Concrete Slab or Wall
    Clean
  • Binder
    Epobond Concrete Epoxy Binder 100 Percent Solids Clear(1 full coat)
  • Slab, Topping or Plaster
    Concrete Slurry – Applied while the Epobond is still tacky.

 
F – 2 AS PRIMER – For interior Concrete Floors(Especially Sensitive Locations
where Strong Odors and VOC’s are not allowed)

  • Existing Concrete Slab or Wall
    Clean
  • Primer
    Epobond Concrete Epoxy Binder 100 Percent Solids Clear
    (1 full coat by trowel) (Sand)
  • Topcoat
    Haardfloor Heavy Duty 98 Percent Solids Epoxy Floor Coating Self-leveling (Up to 2 mm. thickness – by trowel) – 11 colors